When it comes to the types of Ethernet Cables that are used for the residential and commercial purposes of connectivity, the most common types of cable that are used, rely on the principle of Twisted Wires. The reason why the Twisted Wires are an excellent approach for this purpose is that the wires’ arrangement allows the current to be balanced out. Within the twisted wires, one wire has the current flowing in one direction while the other has the current flowing in the opposite direction of it. This allows the generated electric field around the twisted pair to cancel out – allowing data transmission over substantial lengths without requiring taking extreme measures!

Ethernet Cables – An Insight into the Basics:

The Computer Networking Wires or the Ethernet Cables like Cat5, Cat6, Cat7, etc. are the ones that commonly serve the purpose of connecting the computers and the servers to modems, which are then connected to the ISPs. While this Computer Network Wiring has undergone important development over the past couple of years, the newer cables that are being produced nowadays are capable of delivering better than their predecessors. While there are numerous options available when it comes to efficient Ethernet Wiring, the most common ones that are used for the commercial and residential purposes are the following:

Category 5e Structured Network Wiring
Category 6 Structured Network Wiring

It is essential here to understand that the only difference between the configurations of these cables is not only restricted to higher speeds. Instead, the Pros and Cons for each one of them are deliberately dependent upon the principle of “Reduced Crosstalk.”

Crosstalk – What it is?

Every electronic equipment is subjected to emitting out electromagnetic waves when they are being operated, so do the Cat Cables. Whenever the Computer Network Wiring is near one another, the electromagnetic waves can cause a significant amount of “Interference,” which can deliberately lead to the increased amount of errors and the data packets being lost. This phenomenon is referred to as “Crosstalk”. The reason why Cat5e and Cat6 cables are preferred is that they have a reduced impact of Crosstalk between the wiring. This is ensured by a variety of methods, a few of which includes better shielding and different design for the twisted cables!

CAT5E & CAT6 – A Thorough Understanding of the Speed Differences!

A useful internet is the one that offers a higher speed. While the familiar lot doesn’t know the differences in the cables’ improved structuring, all they care about is what internet speed would they be entitled to. The primary difference between the Category 5e Structured Network Wiring and the Category 6 Structured Network Wiring depends upon the maximum frequency they can deliver. While the Cat5e Cable can deliver up to 100 MHZ, the Cat6 cable leads the charts by delivering up to 250 MHZ.

Evaluating the Difference in the Data Rates!

There isn’t much of a difference in the Data Rates for both of these Computer Network Wirings. The data rates both of these cables are rated for is 1GB. While the Cat6 Cable is a development of the Cat5e Cable, it is capable of achieving up to 10GB if the shorter distance is taken into consideration! This, however, may get obstructed on a few specific aspects like the cable quality, the types of connectors used, etc.

CAT5E and CAT6 Cables – Do They Use the Same Connectors?

Considering the connectors to be used with each of these cables, an RJ45 connector (commonly known as the Keystone Jack) is what can act optimally for both of them. Although different wiring schemes may be used for these cables, the difference may arise depending upon the cable structure. If you are using an Unshielded Cable, it is advised to use the Unshielded Connectors and vice versa!

Making the Right Choices – Which One Do You Really Need?

The question “Which cable out of the two is better to use?” depends viably upon the personal preference. Although Category 6 Structured Network Wiring is undoubtedly a much better choice when evaluating as per the technical specifications, your specified use is what could help you make a better choice! Hence, depending upon your networking needs, the alternatives may differ. If your need is strictly restricted to the residential usage, the Category 5e Structured Network Wiring is undoubtedly a much better option for you to choose. If a commercial purpose is what you need the Computer Network Wiring for, the Cat6 Cables are would imminently get the job done for you!

Are you looking for the best Computer Network Wiring to suffice your Ethernet Needs? Datel Corp has got all the right solutions for you to choose from! To have your needs catered, get in touch with us today!